Change The Iot Wifi Password Or Security Level - NETGEAR SXR80 User Manual

Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80
11. Make sure that an IoT device can connect to the WiFi network with its new settings.
If you cannot connect using WiFi, check the following:
• Is your WiFi-enabled computer or mobile device connected to another WiFi
network in your area? Some WiFi devices automatically connect to the first open
network without WiFi security that they discover.
• Is your computer or mobile device trying to connect to your network with its old
settings (before you changed the settings)? If so, update the WiFi network
selection in your computer or WiFi device to match the current settings for your
network.

Change the IoT WiFi password or security level

You must be connected to the admin network to change the IoT password and security
level.
Note: The router web interface calls the IoT WiFi network the Wireless 3 network.
To change the IoT WiFi network password or WPA settings:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless > Wireless 3.
The WiFi settings for the wireless 3 network display on the page.
5. Under Security Options, select a WPA option:
• WPA2-PSK [AES]. The WPA2 option uses the newest standard for the strongest
security, but some older computers and WiFi devices cannot use WPA2.
Specify Network Settings 99 User Manual