Table of Contents
Advertisement
6. Hanging the Fan (cont.)
1.
Carefully lift the fan motor assembly up to the mounting bracket
and seat the hanger ball in the mounting bracket socket.
Make sure the tab on the mounting bracket socket is properly
seated in the groove in the hanger ball (Fig. 9). Rotate the socket
assembly until the ball drops and locks into the hanger bracket
screw.
2.
Secure the safety cable to the building structure using spring
washer, flat washer, and wood screw provided (Fig. 9).
F R- W1 8 1 1
Safety cable
FIGURE 9
11
Advertisement
Table of Contents
Need help?
Do you have a question about the FR-W1811-54 and is the answer not in the manual?