Klarstein STUDIO 5 ARC Manual page 29

Note: You can exit the timer setting at any time by pressing MENU. In the event of a
power failure, the timer icon (clock) will blink continuously, signaling that no timer has
been set. In this case, you must reprogram the timer.
(C) Program Weekly Timer
Note: Before you can program the week timer, you must first set the current weekday
and time (see Setting the Current Weekday and Time).
There are 4 pre-set programs available. Each program includes one period or several
periods of time in which the fireplace will heat. Outside of these periods of time, the
fireplace will not heat. The period of one program may overlap with the period of
another program.
Preset programs
P1 (program 1)
Monday to Friday from 05:15 for 4 hours high heating.
P2 (program 2)
Saturday to Sunday from 06:20 for 4 hours low heating.
P3 (program 3)
Monday to Friday from 17:45 for 4 hours high heating.
P4 (Programm 4)
Saturday to Sunday from 16:30 for 4 hours low heating.
EN
29