Connecting Wireless Remote Control; Filter Indication) - ubbink Ubiflux Vigor W400 Installation Regulations

11.1.2 Connecting wireless remote control (without filter indication)
A = Ubiflux Vigor appliance (For example a Ubiflux Vigor appliance type 4-0)
B = Receiver for wireless remote control
C = Transmitter with 4 settings (for example kitchen)
D = Transmitter with 2 settings (for example bathroom)
E = Any additional 2- or 4-settings transmitters (maximum of 6 transmitters can be signed on to 1 receiver)
F = Modular cable: Note: For the modular cable that is used, the "tab" of both modular connectors must be mounted facing
the mark on the modular cable. Wire colors C1 - C6 may vary dependent on the type of modular cable used.
Ubiflux Vigor W400 615912-D Ubbink / 39