Connection Examples Multiple Switch; Multiple Switch With Filter Indication; Wireless Remote Control (Without Filter Indication); Additional Multiple Switch With Filter Indication - ubbink Ubiflux W300 + Installation Instructions Manual

Chapter 11
E2365-A.pdf 26-1-2011 14:26:21
E2365-A.pdf 26-1-2011 14:26:21
E2365-A.pdf 26-1-2011 14:26:21
11.2 Connection examples multiple switch
.pdf 26-1-2011 14:26:21
E2365-A.pdf 26-1-2011 14:26:21
A multiple switch can be connected to the modular connector X2 of the Ubiflux. This modular connector X2 is directly accessible at
the rear of the display cover (see §11.1) without having to take it off.
11.2.1 Multiple switch with filter indication
230 V
50 Hz
A = Ubiflux
B = Multiple switch with filter indication
11.2.2 Wireless remote control (without filter indication)
230 V
50 Hz
11.2.3 Additional multiple switch with filter indication
230 V
50 Hz
A = Ubiflux
B1 = Multiple switch with filter indication
B2 = Additional multiple switch with filter indication
C = Splitter
Electric connections accessories
Wire colours C1 - C6 may vary dependent on
the type of modular cable used.
Note: For the modular cable use, the "tab" of both modular connectors must be
mounted facing the mark on the modular cable.
11.2.4 Additional multiple switch with wireless
230 V
50 Hz
A = Ubiflux
B = Multiple switch with filter indication
C = Receiver for wireless remote control
D = Transmitter with 4 settings
E = Splitter
Ubiflux W300(+) / W400(+) / W450+
A = Ubiflux
B = Receiver for wireless
remote control
C = Transmitter with 4 settings
(e.g. kitchen)
E = Any additional 4-settings transmit-
ters (A maximum of 6 transmitters
can be signed on to 1 receiver)
remote control
D
34