Inductor Indication; Waveform And Voltage Measurement - Toshiba TLP470A Service Manual

1-5. Inductor Indication

Unit
Tolerance
Type

1-6. Waveform and Voltage Measurement

• Measurement of waveform and voltage at each
section in the color circuits was conducted with
sufficient service color bar signal being received and
reproduced in normal conditions.
• Waveforms and voltage values for the remaining
circuit were measured with a broadcasting signal
normally received, so they may vary slightly accord-
ing to the programs being received. Use them as a
measure for servicing.
• All voltage values except the waveforms are ex-
pressed in DC and measured by a digital voltmeter.
........... Η
None
µ ........... µH
m ........... mH
None ........... ±5%
B ........... ±0.1%
C ........... ±0.25%
D ........... ±0.5%
F ........... ±1%
G ........... ±2%
K ........... ±10%
M ........... ±20%
PL ........... Peaking
For other, model name is described.
2-3
10µ
Type Tolerance
Fig. 2-1-11