Advertisement
Checking the LEDs (Lights)
Look at the LEDs (lights) on the top panel of the Q1000Z.
• The POWER light blinks during start-up and is green once the
Q1000Z is ready.
• The DSL light is green if a physical DSL connection exists and
blinks when transmitting data.
• The INTERNET light is green when Internet access is available.
• The ETHERNET light turns on if the ETHERNET port is properly
connected. The light blinks when the Q1000Z is sending or
receiving data through the ETHERNET port.
• The WIFI light turns on when the wireless network is enabled.
If none of the LEDs (lights) are on, check your connections.
Make sure that you have the power adaptor connected to the
Q1000Z and plugged in to an appropriate power source.
Make sure the power source is turned on. Turn the Q1000Z
off, wait for a few seconds and turn it back on. If the LEDs
are still off, contact your local vendor.
As of writing, the USB LED is reserved for future use.
5
Advertisement
