Good Working Practices - Yamaha SR230 2004 Service Manual

GENERAL INFORMATIONx
3. Avoid skin contact with lubricants; do not,
for example, place a soiled wiping-rag in
one's pocket.
4. Hands, and any other part of the body
which have been in contact with lubricants
or lubricant-contaminated clothing, should
be thoroughly washed with hot water and
soap as soon as practicable.
5. To protect the skin, the application of a suit-
able barrier cream to the hands before
working is recommended.
6. A supply of clean lint-free cloths should be
available for wiping purposes.

GOOD WORKING PRACTICES

1. The right tools
Use the special tools that are designed to
protect parts from damage. Use the right
tool in the right manner – don't improvise.
2. Tightening torque
Follow the torque tightening instructions.
When tightening bolts, nuts and screws,
tighten the larger sizes first, and tighten
inner-positioned fasteners before outer-
positioned ones.
3. Non-reusable items
Always use new gaskets, packings,o-rings,
oil seals, split-pins and circlips, etc. on
reassembly.
1-3
GEN
1
INFO