Copying All Files - JVC Everio GZ-RX500 User Manual

Table of Contents

Advertisement

Copying All Files

All videos or still images recorded on this unit will be copied.
You can also select and copy only the videos or still images that have never
been copied.
1
Select video or still image mode.
2
Tap "BACK UP".
.
While the video mode is shown in the image, the same operations
0
apply for the still image mode.
Tap the A icon to switch between the video and still image modes.
0
3
Tap the media you would like to make a backup.
.
4
Tap the desired method.
.
"ALL SCENES" (video)/"ALL IMAGES" (still image):
0
All videos or still images in this unit are copied.
"UNSAVED SCENES" (video)/"UNSAVED IMAGES" (still
0
image):
Videos or still images that have never been copied are automatically
selected and copied.
5
Check that there is sufficient remaining space on the hard disk drive and
tap "YES".
.
Backup starts when "YES" is tapped.
0
6
Tap "OK" when "COMPLETED" is displayed.
.
7
Close the LCD monitor of this unit to turn off this unit and disconnect the
USB cable.
Caution :
Do not turn off the power or remove the USB cable until copying is
0
complete.
Files that are not on the index screen during playback cannot be copied.
0
Special files cannot be copied either.
Copying may take time. (For example, saving 1 hour video in XP mode
0
takes about 20 minutes.)
Copying
91

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents