JVC Everio GZ-RX500 User Manual page 100

Copying
8
Click "Finish".
.
9
Click "Quit".
.
Installation is complete, and two icons are created on the desktop.
0
10
Remove this unit from your PC.
"Disconnecting this Unit from Computer" (A p. 102)
Memo :
If "Everio Software Setup" doesn't appear, double-click "JVCCAM_APP"
0
in "My Computer" or "Computer", then double-click "install (or Install.exe)".
If the auto play dialog box appears, select "Open folder to view files" and
0
click "OK". Then, click "install (or Install.exe)" in the folder.
Windows Vista/Windows 7
o
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
Before connecting the cable, close the LCD monitor to turn off this
0
unit.
.
3
Open the LCD monitor.
.
This unit turns on and the "SELECT DEVICE" menu appears.
0
4
Tap "CONNECT TO PC".
.
100
5
Tap "PLAYBACK ON PC".
.
"Everio Software Setup" appears on the computer.
0
Operations are to be performed on the computer after the screen
switches.
6
Perform the following operations on your computer.
A Click "Open folder to view files" on the auto play dialog box, and then
double-click "install.exe".
B Click "Yes" on the User Account Control screen.
*Windows 7
.
In case of Windows Vista, click "Allow" (continue).
0
"Software Setup" appears after a while.
0
If it doesn't appear, double-click "JVCCAM_APP" in "Computer" or "My
0
Computer", then double-click "install.exe".
7
Click "Everio MediaBrowser 4".
.
Follow the on-screen instructions to finish the installation.
0
8
Click "Finish".
.
9
Click "Quit".
.
Installation is complete, and two icons are created on the desktop.
0
10
Remove this unit from your PC.
"Disconnecting this Unit from Computer" (A p. 102)