JVC Everio GZ-RX500 User Manual page 46

Recording
5
Tap "ON".
.
Tap L to exit the menu as the previous screen appears.
0
6
Point the camera toward the human subject.
A still image is automatically captured when smiles are detected.
0
.
PHOTO lights up when a still image is being captured.
0
You can display the name and smile level (%) together with the frame
0
by setting "SMILE%/NAME DISPLAY" in the menu to "ON" before
recording.
"Setting SMILE%/NAME DISPLAY" (A p. 49)
Memo :
The camera is able to detect up to 8 faces. Smile levels (%) will be
0
displayed for up to 3 of the largest faces displayed on the screen.
This function may not work properly depending on the shooting conditions
0
(distance, angle, brightness, etc.) and the subject (direction of face, smile
level, etc.). It is also difficult to detect a smile in backlight.
After a smile is detected and captured, it takes time before the next
0
recording may be performed.
"SMILE SHOT" does not work in the following cases:
0
- when menu is being displayed
- when remaining recording time or battery power is being displayed
- when "TIME-LAPSE RECORDING", "CLOSE-UP SUB-WINDOW",
"RECORDING EFFECT" or "DATE/TIME RECORDING" is set
Caution :
If appropriate results cannot be obtained, record with "SMILE SHOT" set
0
to "OFF".
46