Table of Contents
Advertisement
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
Rinse Stop is activated.
¡
→ "Buttons", Page 22
The last rinse cycle of the set pro-
¡
gramme has ended and the laun-
dry is in the rinsing water.
Set the Schleudern programme or
1.
a programme for draining the wa-
ter.
→ "Programmes", Page 23
Press Start / Nachlegen.
2.
13.14 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.15 Switching off the appli-
ance
Turn the programme selector to
1.
.
Aus
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
▶
buttons for approx. 3 seconds.
The display shows
a
The control elements are locked.
a
The childproof lock remains active
a
even after the appliance has been
switched off and in the event of a
power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
▶
buttons for approx. 3 seconds.
goes out in the display.
a
Childproof lock en
3 Sek.
.
3 Sek.
31
Advertisement
Table of Contents
