Initial Setup - Jabra PANACAST 50 Administrator's Manual

3.3 Initial setup

Device configuration
The PanaCast 50 Video Bar System configuration can be managed using the Web
Console or the touch controller.
Accessing the Web Console
The Web Console can be accessed by entering the IP address of the video bar or
touch controller into a web browser on a device connected to the same network. If
this is the first time accessing the Web Console, the default username is admin and
the password is the last 6 digits of the video bar or touch controller serial number.
It is recommended to change the username and password.
Touch controller
The touch controller can also be used to make changes to the PanaCast 50 Video
Bar System configuration.
In Microsoft Teams Room mode, follow these steps to access Jabra settings
• Go to Settings > Device settings
• Click on Admin > Enter the username and password
18