Hardware Setup Overview - Jabra PANACAST 50 User Manual

3. Hardware setup overview

This is an overview of the steps required to set up the Jabra PanaCast 50 Video Bar
System.
1. Mount the video bar.
Refer to the assembly videos or assembly instructions available in jabra.com/
help/panacast50vbs/getstarted
2. Connect the cables.
Refer to the cabling instructions available in the Installation manual.
3. Set up the touch controller.
After the device powers on, follow the setup wizard displayed on the touch
controller. During the last step of the configuration, it is necessary to log into
the video conferencing account of your service provider.
13