Jabra PANACAST 50 Administrator's Manual page 16

3.2 Connecting to room monitors
The following shows you how to connect the system to your room monitor. The
PanaCast 50 Video Bar System supports a connection to a single touch display.
Single monitor
When only one monitor is used,
the supplied HDMI cable can be
Monitor
used to connect HDMI OUT 1 of
the video bar to the HDMI input of
the monitor. Once the PanaCast
50 Video Bar System has been set
HDMI OUT 1
up, the VaaS provider determines
Power Ethernet
which content and video feeds, as
well as which layouts, are
displayed on the monitor.
PanaCast 50 Video Ethernet switch
Bar System Base Unit
(video bar)
16