Lorex LW1000P Series Instruction Manual page 11

Wall Mounting Instructions
To mount the camera to a wall:
1. Loosen the screw located on the side of the
camera base using a slot head screwdriver.
2. Pull the camera free from the Stand.
3. Mount the stand to the wall:
Mark the position of the two screw holes on the wall.
Drill holes and insert the drywall plugs as needed.
Position the power cable through either slot on the
top or bottom of the stand as desired.
Firmly attach the stand to the wall using the provided
screws.
NOTE: Do not allow the camera to come in contact
with other objects while it is detached from the stand,
as this may cause damage to the camera.
4. Insert the Camera into the top slot of the stand.
5. Point the camera in the desired position. Tighten the side screw to
secure the camera to the Stand.
6. Adjust the angle of the
camera for a desired view.
6
Camera Installation
1
2
3
4
5
11