DeLonghi ECAM21.116 Instructions For Use Manual page 19

The coffee is delivered too
slowly or a drop at a time
Coffee does not come out of
one of the spouts
The frothed milk has large
bubbles
The milk is not frothed
Steam delivery stops during
use
The appliance does not come
on
The coffee is ground too finely.
The spouts are blocked.
The milk is not cold enough or is not
semi-skimmed.
Cappuccino maker dirty.
A safety device stops steam delivery after 3
minutes.
It is not plugged into the mains socket.
The main switch (A8) is not turned on.
Turn the grinding adjustment dial one click
clockwise while the coffee mill is in operation
(fig. 10). Continue one click at a time until cof-
fee delivery is satisfactory. The effect is only vi-
sible after delivering 2 coffees (see the section:
"Adjusting the coffee mill" on page 11).
Clean the spouts with a toothpick.
You should ideally use skimmed or semi-skim-
med milk at refrigerator temperature (about
5°C).
If the result is still disappointing, try another
brand of milk.
Clean as described in the section "Cleaning the
cappuccino maker after use" on page 13.
Wait a few minutes, then activate the steam
function again.
Plug into the mains socket.
Place the main switch in the I position (fig. 1).
18