Channel Installation; Antenna/Cable Installation; Channel List Copy - Philips 6102 Series User Manual

19

Channel installation

19.1

Antenna/cable installation

Update channels
Manual channel update
You can always start a channel update yourself.
To start a channel update manually...
1 - Press  , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for channels and press OK.
4 - Select Start now and press OK.
5 - Select Update channels and press OK.
6 - Press  BACK to close the menu.
Reinstall channels
Reinstall all channels
You can reinstall all channels and leave all other TV
settings untouched.
If a PIN code is set, you will need to enter this code
before you can reinstall channels.
To reinstall channels...
1 - Press  , select Antenna/cable installation and
press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for channels and press OK.
4 - Select Start now and press OK.
5 - Select Reinstall channels, select Next and
press OK.
6 - Select your country and press OK.
7 - Select Antenna or Cable.
8 - Select Start and press OK to update channels.
This can take a few minutes.
9 - Press  BACK to close the menu.
Reinstall TV
You can redo the full TV installation. The TV is
completely reinstalled.
To redo the full TV installation...
1 - Press  , select General settings > Reinstall
TV and press OK.
2 - Enter your PIN code if necessary.
3 - Select Yes and press OK to confirm.
4 - The TV will perform a complete reinstallation. All
settings will be reset and installed channels will be
replaced. The installation can take a few minutes.
5 - Press  BACK to close the menu.
19.2

Channel list copy

Introduction
Channel List Copy is intended for dealers and expert
users.
With Channel List Copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel List Copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
• Both TVs must be from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Current software version
To check the current version of the TV software...
1 - Press  , select Update Software and
press  (right) to enter the menu.
2 - Select Current Software Info and press OK.
3 - The version, release notes, and creation date are
shown. Also, the Netflix ESN Number is shown, if
available.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Copy a channel list
To copy a channel list...
1 - Switch on the TV. This TV should have channels
installed.
2 - Plug in a USB flash drive.
3 - Press  , select General settings > Channel
List Copy and press OK.
4 - Select Copy to USB and press OK. You might
be asked to enter the Child Lock PIN code to copy the
channel list.
5 - When copying is done, unplug the USB flash
drive.
6 - Press  (left) repeatedly if necessary, to close
the menu.
Now you can upload the copied channel list onto
another Philips TV.
51