Contents 10.1 About the Home menu 1 My new TV 10.2 Open the Home menu 1.1 Smart TV 11 Utilities 1.2 App gallery 1.3 Rental videos 11.1 About Utilities 1.4 Ultra HD TV 12 Netflix 1.5 Social Networks 1.6 Pause TV and recordings 12.1 About Netflix 2 Setting up 13 Sources...
Page 3
22.5 Dimensions and Weights 22.6 Connectivity 22.7 Sound 22.8 Multimedia 23 Troubleshooting and support 23.1 Register your TV 23.2 Help 23.3 Troubleshooting 23.4 Online help 23.5 Consumer care/Repair 24 Safety and care 24.1 Safety 24.2 Screen care 25 Terms of use, copyrights and licenses 25.1 Terms of use 26 Copyrights 26.1 Dolby...
Smart TV This TV has an Ultra HD display. Its resolution is Connect this Philips Smart LED TV to the Internet four times higher than normal HD displays. Ultra HD and discover a new world of television. You can install...
Setting up Read safety Read the safety instructions first before you use the Power cable To read the instructions, in Help, press the color Keywords and look up Safety instructions. • Insert the power cable into the POWER connector on the back of the TV.
• WPS If your router has WPS, you can directly connect to Network the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press Connect to make the connection. If you have devices in your wireless network that use Network and Internet the WEP security encryption system, you cannot use...
Page 7
information on indoor range, transfer rate and other 1 - Press , select Network and press (right) to factors of signal quality. enter the menu. • Use a high-speed (broadband) Internet connection 2 - Select View network settings and press OK. for your router.
Page 8
Switch on Wi-Fi connection TV network name You can switch the Wi-Fi connection on your TV on If you have more than one TV in your home network, or off. you can give the TV a unique name. To switch on Wi-Fi… To change the TV name…...
TV settings when you switch to this device in the Sources menu. If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
standby. Viera Link. Not all brands are fully compatible with EasyLink. Inform yourself regarding which passive MHL cable is suited for your mobile device. In particular, with the Example HDMI CEC branding names are property of HDMI connector for the TV on one side, the type of their respective owners.
Cable Box Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV. Audio Out - Optical Audio Out - SPDIF is a high quality sound connection. This optical connection can carry 5.1 audio channels. Next to the antenna connections, add an HDMI cable If your device, typically a Home Theater System to connect the Set-top box to the TV.
Connect with HDMI ARC Use an HDMI cable to connect a Home Theater System (HTS) to the TV. You can connect an HTS with a built-in disc player. HDMI ARC If your Home Theater System has an HDMI ARC connection, you can use HDMI 4 on the TV to connect.
To adjust the volume… Blu-ray Disc Player 1 - Press , select Sound > Headphones volume and press OK. 2 - Press the arrows (up) or (down) to adjust Use a High speed HDMI cable to connect the Blu- the value.
Installation Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. 1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
the USB connections on the TV. Do not connect 1 - Press , select General settings and another USB device to the other USB ports when press (right) to enter the menu. formatting. 2 - Select USB keyboard settings, and press OK to 2 - Switch on the USB Hard Drive and the TV.
4.16 4.18 Photo Camera Computer To view photos stored on your digital photo camera, Connect you can connect the camera directly to the TV. You can connect your computer to the TV and use Use one of the USB connections on the TV to the TV as a PC monitor.
movie. 4 - The menu will disappear automatically. Switching On and To switch the TV on standby, select and press the joystick key. On or standby Before you switch on the TV, make sure you plugged the POWER connector into the mains power connector on the back of the TV.
Remote control Key overview 1 - Arrow / navigation keys To navigate up, down, left or right. 2 - OK key To confirm a selection or setting. Standby / On To switch the TV On or back to Standby. 3 - ...
Enter a space. 6 - Navigation and OK Navigate through the menus, and confirm a selection. 7 - Delete the character in front of the text cursor. 8 - Share this To share online what you are now watching. Writing text With the keyboard on the back of the remote control, you can write text in any text field on screen.
IR sensor The TV can receive commands from a remote control that uses infrared (IR) to send commands. If you use this kind of remote control, always point it at the infrared sensor on the front of the TV. Warning Do not put any objects in front of IR sensor of the TV as it may block the IR signal.
If you lock a channel, it will be marked with a (lock). Channels Radio stations If digital broadcasting is available, digital radio stations are installed during installation. Switch to a Install Channels radio channel just like you switch to a TV channel. For more information, in Help, press the color ...
open Find Channel and press OK to open a text 5 - Enter your 4 digit PIN code if the TV asks for it. field. 6 - Press (left) to go back one step or 6 - Enter a number, a name, or part of a name, press ...
Set code/ Change code Audio language The Child Lock PIN code is used to lock or unlock For digital broadcast, you can select an available channels or programs. audio language temporarily if none of your preferred languages are available. To set the lock code or to change the current code… For more information, in Help, 1 - Press , select Child Lock and press ...
press OK. About favorite Channels In a favorite channel list, you can collect the channels Menu Language you like. With a Favorites List selected, you can only tune to To change the language of the TV menus and the channels in that list when using messages…...
Internet or vice versa. The TV might have switched to From the Internet automatically. TV guide To make the recordings available in the list of recordings, switch to the setting that was selected when the recordings were made. What you need With the TV Guide you can view a list of the current Using the TV guide and scheduled TV programs of your channels.
Page 26
3 - Select Change day, select Previous day, Today or Next day and press OK. 4 - Press BACK to close the menu. Set a reminder You can set reminders that alert you of the start of a program with a message on screen. •...
Press (Right) or (Left) to scroll through the programs of a channel. Recording and To change the date of the list, press OPTIONS and select Select day. In the list, select the day you Pause TV want and press OK. If the TV guide comes from the Internet, you can select the date at the top of the page and press OK.
Page 28
While recording a program on the USB Hard Drive, Watch a recording you cannot pause a broadcast. To watch a recording . . . Instant replay 1 - Press Home , While watching a broadcast from a digital TV channel, select Utilities >...
Home menu 10.1 About the Home menu Channels This row contains all channels. Sources This row contains available sources on this TV. Utilities This row contains TV functions available to the user. Quick settings This row contains settings available to the user. 10.2 Open the Home menu To open the Home menu and open an item…...
Utilities 11.1 About Utilities Smart TV Open Smart TV page. TV guide For more information, in Help, press the color Keywords and look up TV guide. Recordings For more information, in Help, press the color Keywords and look up Recording. Channels View channel list.
Netflix 12.1 About Netflix If you have a Netflix subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
13.3 Scan connections Sources To rescan connections and update the Sources menu, 13.1 press Scan connections. (if key is available Switch to a device on the bottom of the screen.) From the list of Sources, you can switch to any of the 13.4 connected devices.
Internet 14.1 Start Internet You can browse the Internet on your TV. You can view any Internet website but most of them are not prepared for a TV screen. • Some plug-ins (e.g., to view pages or videos) are not available on your TV.
Navigate to the menu bar and select the type of file you want to watch or play. Movies, photos and Select Photos , Music or Movie . Alternatively, you can open the Folders view music and browse your folders to look for a file. Sorting 15.1 To browse your photos by date, month, year, or...
15.5 15.6 View your photos Play your music View photos Play music To view photos, select Photos in the menu bar, • To play music, select Music in the menu bar, select a photo thumbnail and press OK. select a song and press OK.
Share a screen on TV Smartphones and To share the screen of your smartphone, tablet or computer on the TV… tablets 1 - Switch on the TV. 2 - On the device, in the settings menu, set the 16.1 device to cast or mirror its display. Miracast uses Wi-Fi Direct™.
All previously connected and also blocked devices In Help, press Keywords and look up HDMI are stored in the Wi-Fi Miracast list of connections. If MHL for more information. you clear this list, all blocked devices will be unblocked. 16.3 To unblock all blocked devices…...
Page 38
4-digit code. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online Smart TV Apps TV or a selection of rental movies from Video stores. You can select and open them from the Open Smart TV Recommended Apps window.
Page 39
4 - Start watching. You can use the (Play) Internet memory on the TV. and (Pause) keys. You will clear your Philips Smart TV registration and Most Video stores ask you to create a login account. parental rating setting, your video store app logins, all...
Page 40
4 - Press (left) repeatedly if necessary, to close the menu.
Stream a TV channel Multi room With Multi Room, you can watch the current TV channel or open the channel list of the other TV. If 17.1 you select a channel from the list, the other TV will also switch to the channel you selected. If the other About Multi room TV has a built-in satellite tuner with installed channels or a connected Hard Disk Drive (HDD) with...
Sleep timer Settings For more information, in Help, press the color Keywords and look up Sleep timer. 18.1 Quick settings 18.2 Picture Eco settings For more information, in Help, press the color Picture style Keywords and look up Eco settings. Select a style For easy picture adjustment, you can select a preset Picture style...
Page 43
Home or Store Advanced picture settings If the Picture style is switched back to Vivid every Game or computer time you switch on the TV, the TV location is set to Shop, a setting meant for in-store promotion. When you connect a device, the TV recognizes its type and gives each device a correct type name.
Page 44
Color temperature Dynamic contrast With Color temperature, you can set the picture to a With Dynamic Contrast, you can set the level at preset color temperature or select Custom to set a which the TV automatically enhances the details in temperature setting yourself with Custom color the dark, middle and light areas of the picture.
Page 45
enter the menu. Motion settings 2 - Select Advanced > Contrast > Gamma, and press OK. Natural motion 3 - Press the arrows (up) or (down) to adjust the value. With Natural motion, you can reduce the motion 4 - Press ...
1 - Press , select Picture and press (right) to 1 - While watching a TV channel, press . enter the menu. 2 - Select Sound and press (right) to enter the 2 - Select Picture format and press (right). menu.
Page 47
enter the menu. Advanced sound settings 2 - Select Advanced > Clear sound and press OK. 3 - Select On or Off, then press OK. Auto volume leveling 4 - Press (left) repeatedly if necessary, to close the menu. With Auto Volume Leveling, you can set the TV to automatically level out sudden volume differences, typically at the beginning of adverts or when you are...
3 - Select On or Off, then press OK. TV placement 4 - Press (left) repeatedly if necessary, to close the menu. As part of the first installation, this setting is set to either On a TV stand or Hung on the wall. If you have changed the placement of the TV since then, Audio out delay adjust this setting accordingly for best sound...
The TV comes with Pixel Plus link up Language settings for more information. turned on and disables the picture quality processing of recent Philips devices connected to the TV. To switch off Pixel Plus link… Clock 1 - Press , select General settings , and In Help, press ...
Page 50
HDMI Ultra HD Home or Store This TV can display Ultra HD signals. Some devices, If the TV is installed in a shop, you can set the TV to connected via HDMI, do not recognize a TV with Ultra display an in store promotion banner. Picture HD and might not work correctly or might show style is set to Vivid automatically.
18.6 Samba TV Clock and language Samba TV makes TV better by cleverly recognizing on- screen content. By enabling, you accept and Clock acknowledge Samba TV's Terms of Services and Privacy Policy. Date and time 1 - Press , select General settings and In some countries, digital broadcasts do not send press ...
3 - Select Audio description and press (right) to enter the menu. 4 - Select Audio description one step further To switch on closed captions, press CC. 2 - Select On and press OK. You can switch subtitles On, Off or On during 6 - Press ...
Page 53
Speech The audio commentary can also hold subtitles for the words which are spoken. To switch on these subtitles (if available) . . . 1 - Press , select Universal access and press (right) to enter the menu. 2 - Select Audio description > Speech and press 3 - Select Descriptive or Subtitles and press OK.
With Channel List Copy, you can copy the channels To start a channel update manually… installed on one TV onto another Philips TV of the 1 - Press , select Antenna/cable installation and same range. With Channel List Copy, you avoid the press OK.
20.3 Channel list version Digital Channel Installation Check the current version of the channel list... If you know the channel frequency of the channels 1 - Press , select General settings > Channel List you want to install, you can search and store digital Copy and press OK.
Download the software 1 - Insert the USB flash drive into your computer. Software 2 - On the USB flash drive, locate the file update.htm and double click it. 3 - Click Send ID. 21.1 4 - If new software is available, download the .zip Update software file.
Source: http://www.libpng.org/pub/png/libpng.html This is a document describing the distribution of the libjpg (6b) source code used on the Philips TV, which fall either This library is used to perform JPEG decoding tasks. under the GNU General Public License (the GPL), or...
Page 59
c-ares (1.7.4) by the Linux family of Unix-like operating systems. c-ares is a C library that performs DNS requests and This piece of software is made available under the name resolves asynchronously. terms and conditions of the Linux Kernel license, This piece of software is made available under the which can be found below.
Page 60
in the libusb community have helped and continue to Source: http://fuse.sourceforge.net/ help with ideas, implementation, support and improvements for libusb. libiconv (1.11.1) This piece of software is made available under the This library provides an iconv() implementation, for terms and conditions of the libusb license, which can use on systems which don't have one, or whose be found below.
Page 61
space. The grep command searches one or more input files Source: http://www.arg0.net/encfs for lines containing a match to a specified pattern. By default, grep prints the matching lines. boost (1.15.0) Source: http://www.gnu.org/software/grep/ A library provides free peer-reviewed portable C++ source libraries is used for encfs. gzip (1.3.12) Source: http://www.boost.org GNU Gzip is a popular data compression program...
Page 62
(2.18) Advanced Encryption Standard (AES) is a Various system utilities. specification for the encryption of electronic data. Source: http://userweb.kernel.org/~kzak/util-linux- Used inside Philips libraries. Source: http://gladman.plushost.co.uk/oldsite/AES/ udhcpc (0.9.8cvs20050303-3) microhttpd (libmicrohttpd-0.9.9.tar.gz) Udhcpc is a very small?DHCP?client geared GNU libmicrohttpd is a small C library that is towards?embedded systems.
Page 63
This is a document describing the distribution of the be found below. source code used on the Philips TV, which fall either Source: http://www.ijg.org/ under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or libmng (1.0.10)
Page 64
Source: http://sourceforge.net/projects/u-boot/files/ This piece of software is made available under the u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download terms and conditions of the DirectFB license, which can be found below. Libcurl (7.21.7) Source: http://sourceforge.net/projects/jointspace/fil HTTP client;libcurl is a free and easy-to-use client- es/remote_applications_SDK/remote_spplications_S side URL transfer library, supporting FTP, FTPS, HTTP, DK_v1.3.1/DirectFB141_source_1.3.1.7z/download HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP, SMTP, POP3 and RTSP.
Page 65
layers of the system. Hardware drivers need to know This piece of software is made available under the nothing about the storage formats used, such as FTL, terms and conditions of the WPA Supplicant license, FFS2, etc., but will only need to provide simple which can be found below.
Page 66
alsa (1.0.24.1) directory search and file locating capabilities to other Advanced Linux Sound Architecture (ALSA). commands. This piece of software is made available under the Source: http://www.gnu.org/software/findutils/ terms and conditions of the alsa license, which can be found below. gawk (3.1.5) Source: http://www.alsa-project.org If you are like many computer users, you would frequently like to make changes in various text files...
Page 67
(2.18) Advanced Encryption Standard (AES) is a Various system utilities. specification for the encryption of electronic data. Source: http://userweb.kernel.org/~kzak/util-linux- Used inside Philips libraries. Source: http://gladman.plushost.co.uk/oldsite/AES/ udhcpc (0.9.8cvs20050303-3) microhttpd (libmicrohttpd-0.9.9.tar.gz) Udhcpc is a very small?DHCP?client geared GNU libmicrohttpd is a small C library that is towards?embedded systems.
Page 68
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/ lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21 82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz HMAC-SHA1 (0.1) keyed-hash message authentication code (HMAC) is a specific construction for calculating a message authentication code (MAC) involving a cryptographic hash function in combination with a secret cryptographic key. As with any MAC, it may be used to simultaneously verify both the data integrity and the authentication of a message.
Product specifications are subject to change without notice. For more specification details of this product, www.philips.com/TVsupport Power End of use • Mains power: AC 110–240 V +/-10% • Ambient temperature: 5°C to 35°C Disposal of your old product and batteries •...
• with TV stand: Width 1239.20 mm - Height 780.34 mm - Depth 259.06 mm - Weight ± 15.60 kg Diagonal screen size • 43PUG6102: 43 inch (108 cm) • 50PUG6102: 50 inch (126 cm) 22.6 • 55PUG6102: 55 inch (139 cm)
Page 71
Supported media server software (DMS) • You can use any DLNA V1.5 certified media server software (DMS class). • You can use the Philips TV Remote app (iOS and Android) on mobile devices. Performance may vary, depending on the capabilities...
To look up topics alphabetically, press the new releases. color key Keywords. Go to www.philips.com/welcome To read the Help as a book, select Book. Before you execute the Help instructions, close Help. To close Help, press the color key Close.
Page 73
Make sure that Location is set to Home. Philips startup screen Picture does not fit the screen When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This Change to a different picture format.
Photos, videos and music from a USB device do not show To solve any Philips TV related problem, you can • Make sure that the USB storage device is set to Mass consult our online support. You can select your Storage Class compliant, as described in the storage language and enter your product model number.
Page 75
Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV, or void your warranty.
The remote control may contain batteries which can TV from the power outlet immediately. easily be swallowed by small children. Keep these Contact Philips TV Consumer Care to have the TV batteries out of reach of children at all times. checked before use.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
(within common industry standards) and is not a malfunction. One of Philips’ leading Terms of use, Business Principles is to take all necessary health and safety measures for our products, to comply with all copyrights and applicable legal requirements and to stay well within the applicable at the time of producing the products.
26.5 Microsoft Copyrights Windows Media 26.1 Windows Media is either a registered trademark or Dolby trademark of Microsoft Corporation in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Page 83
Open source software 57 TV Guide, Reminder 26 Options on a Channel 23 TV Installation 55 Pause TV 28 Universal Access 52 Photo camera, connect 16 Universal Access, Speakers/Headphones 52 Photos, movies and music 34 USB Hard Drive, disk space 14 Picture Format 45 USB Hard Drive, Installation 14 Picture Format, advanced 45...