Sources; Switch To A Device; Options For Tv Input; Scan Connections - Philips 6102 Series User Manual

12

Sources

12.1

Switch to a device

From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to
watch TV, open the content of a connected USB Flash
Drive or see the recordings you made on a connected
USB Hard Drive. You can switch to your connected
devices to watch their programs, or to a digital
receiver, or Blu-ray Disc player.
To switch to a connected device...
1 - Press SOURCES to open the Sources menu.
2 - Select one of the items in the source list and
press OK. The TV will show the program or content of
the device.
3 - Press SOURCES again to close the menu.
One Touch Play
With the TV on standby, you can switch on a disc
player with your TV remote control.
To switch on both the disc player and TV from
standby and start playing the disc immediately,
press  (Play) on the TV remote control. The device
must be connected with an HDMI cable and both the
TV and the device must have HDMI CEC switched on.
12.2

Options for TV Input

Some TV input devices offer specific settings.
To set the options for a specific TV input...
1 - Press SOURCES.
2 - Select the TV input from the list and press OK.
3 - Press  OPTIONS. You can set the options for
the selected TV input here.
4 - Press  OPTIONS again to close the Options
menu.
Possible options...
Controls
With this option you can operate the connected
device with the TV remote control. The device must
be connected with an HDMI cable and both the TV
and the device must have HDMI CEC switched on.
12.3

Scan connections

To rescan connections and update the Sources menu,

press Scan connections. (if
on the bottom of the screen.)
12.4

Game or computer

The device type determines picture and sound styles,
resolution values and other specifics. You don't have
to worry about the ideal settings.
For some devices the device type is unclear. A game
console can have a built-in Blu-ray Disc player, so
the type is set to Player because it is used as a disc
player most of the time. For this kind of device, you
can temporarily switch to the ideal settings for
gaming. Or alternatively, switch to the ideal settings
for a connected computer.
You can only use the setting Game or
Computer when you switch to a connected device in
the Sources menu. The Game or Computer setting is
stored for the selected device.
To switch to the ideal settings for gaming or computer
manually...
1 - Press  , select Picture > Advanced and
press OK.
2 - Select Game or Computer and press OK.
3 - Select Game, Computer or Off.
4 - Press  (left) to go back one step or
press  BACK to close the menu.
Remember to set this setting back to Off when you
stop playing the game.
29

key is available