Software; Update Software; Software Version; Local Updates - Philips 6102 Series User Manual

20

Software

20.1

Update software

Update from Internet
If the TV is connected to the Internet, you may receive
a message to update the TV software. You need a
high-speed (broadband) Internet connection. If you
receive this message, we recommend you to carry out
the update.
With the message on screen, select Update and
follow the instructions on screen.
You can also look for a software update yourself.
During the software update, there is no picture and
the TV will switch off and on again. This might happen
several times. The update can take a few minutes.
Wait until the TV picture comes back up. Do not press
the power switch  on the TV or on the remote
control during the software update.
To look for a software update yourself...
1 - Press  and press OK.
2 - Select Update Software > Search for
Updates and press OK.
3 - Select Internet and press OK.
4 - The TV will look for an update on the Internet.
5 - If an update is available, you can update the
software right away.
6 - A software update can take several minutes. Do
not press the  key on the TV or remote control.
7 - When the update is done, the TV will return to the
channel you were watching.
Update from USB
It might be necessary to update the TV software. You
need a computer with a high-speed Internet
connection and a USB flash drive to upload the
software on the TV. Use a USB flash drive with at least
500MB free space. Make sure that write protection is
switched off.
To update the TV software...
1 - Press  and press OK.
2 - Select Update Software > Search for
Updates and press OK.
3 - Select USB and press OK.
Identify the TV
1 - Insert the USB flash drive into one of the USB
connections of the TV.
2 - Select Write to USB and press OK. An
identification file is written on the USB flash drive.
Download the software
1 - Insert the USB flash drive into your computer.
2 - On the USB flash drive, locate the
file update.htm and double click it.
3 - Click Send ID.
4 - If new software is available, download the .zip
file.
5 - After the download, unzip the file and copy the
file autorun.upg onto the USB flash drive. Do not
place this file in a folder.
Update the TV software
1 - Insert the USB Flash Drive into the TV again. The
update starts automatically.
2 - A software update can take several minutes. Do
not press the  key on the TV or remote control. Do
not remove the USB flash drive.
3 - When the update is done, the TV will return to the
channel you were watching.
If a power cut occurs during the update, never
remove the USB flash drive from the TV. When the
power returns, the update will continue.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB flash drive.
20.2

Software version

To view the current TV software version...
1 - Press  , select Update Software > Current
Software Info and press OK.
2 - The version, Release Version is shown. Also, the
Netflix ESN Number is shown, if available.
3 - Press  (left) repeatedly if necessary, to close
the menu.
20.3

Local updates

For dealers and expert users...
1 - Press  , select Update Software > Local
updates and press OK.
2 - Follow the on-screen instruction.
3 - Press  (left) repeatedly if necessary, to close
the menu.
20.4

Open source software

This television contains open-source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
53