Table of Contents
Advertisement
6
Channel Installation
6.1
Antenna Installation
1 - Press MENU > TV
options > Settings > Channel and press OK.
2 - Select Channels > Channel Scan and
press OK.
Alternatively, you can perform the channel scan by...
MENU > Navigation Keys up > Channels > New
Channels Available
6.2
Update Channels
Automatic Channel Update
If you receive digital channels, you can set the TV to
automatically update these channels.
Once a day, the TV updates the channels and stores
new channels. The TV must be in standby to
automatically update channels. You can switch off
automatic update.
To switch off the automatic update...
1 - Press MENU > TV options
> Settings > Channel.
2 - Enter your PIN code if necessary.
3 - Select Auto Channel Update and press OK.
4 - Press Back, repeatedly if necessary, to close the
menu.
In certain countries, the Automatic channel update is
done while watching TV or on any moment when the
TV is in standby.
Manual Channel Update
You can always start a channel update yourself.
To start a channel update manually...
1 - Press MENU > TV options > Settings > Channel
> Channels > Channel Scan and press OK.
2 - Enter your PIN code if necessary.
3 - Select Search for Channels and press OK to
update channels. This can take a few minutes.
4 - Press Back, repeatedly if necessary, to close the
menu.
6.3
Reception Quality
You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel...
1 - Press MENU > TV
options > Settings > Channel >
Channels > Single RF Scan and press OK.
2 - Select RF Channel.
3 - Press Navigation keys left or right to select a
channel and press OK. The signal level and signal
quality is shown for this channel.
4 - Press Back, repeatedly if necessary, to close the
menu.
6.4
Analog Manual Scan
Analog TV channels can be manually installed.
To install analog channels manually...
1 - Press MENU > TV options > Settings >
Channel > Channels and press OK.
2 - Select Analog Manual Scan and press OK.
6.5
Channel Scan or Store Type
You can set the channel type for scanned or stored.
To set the channel scan type...
1 - Press MENU > TV
options > Settings > Channel > Channels and
press OK.
2 - Select Channel Scan Type and press OK.
3 - Select the scan type you want and press OK.
4 - Press Back, repeatedly if necessary, to close the
menu.
To set the channel store type...
1 - Press MENU > TV
options > Settings > Channel > Channels and
press OK.
2 - Select Channel Store Type and press OK.
3 - Select the store type you want and press OK.
4 - Press Back, repeatedly if necessary, to close the
menu.
14
Advertisement
Table of Contents
