Silvercrest 72022 Operating Instructions Manual page 33

Before taking into use
■ Operate the toaster without bread for 5 times at the maximum browning
level.
■ Afterwards, clean the toaster as described in the chapter "Cleaning".
NOTICE
The operating slide 2 only engages when the cable is connected to a
►
mains power socket.
► With the fi rst usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
suffi cient ventilation. For example, open a window.
Operation
Adjusting the browning level
The desired level of browning, from "light" (1) to "dark" (6), can be adjusted
infi nitely with the toasting dial 3. The setting
toasted bread.
NOTICE
► Take note that, subject to the demand made on the toaster, the level of
browning can vary somewhat with an unvarying adjustment of the toasting
dial 3! The less the number of slices inserted, the higher is the browning
level. Thus, if you are not intending to toast many slices, always set the
toasting dial 3 a little lower.
Toasting
CAUTION - RISK OF FIRE!
When the appliance is in operation, do NOT cover the toasting slots 7.
►
There will be a risk of fi re! The appliance could be irreparably damaged!
1) After setting the desired browning level, insert the bread into the toaster
slots 7.
2) Press the operating slide 2 downwards. The automatic bread centring device
centres the inserted bread in the toaster slots 7. During the toasting process
the control lamp integrated in the "Stop" button 9 glows.
3) When the desired level of browning has been reached the toaster switches
itself off automatically, the slices are ejected to the top and the control lamp
goes out.
STOCD 1000 A1
is for the reheating of already
GB
31