Table of Contents
Advertisement
m
F
odiFiCAtions
or
The Kodiak has a factory height of 19
modifying the unit and the surround panel.
Spacer
Figure 19: Installing Spacer onto Surround Panel.
Insert Unit:
1. Remove the thirteen T-20 screws holding the
cabinet top in place (refer to Figure 20).
2. Remove the cabinet top and flip it onto its top.
3. Remove the Air Deflector (shown in Figure 21) by removing the two (2) T-20 screws.
4. Re-install the cabinet top onto the unit. The screw holes along the top of the unit should now line up
with the top set of holes on the cabinet top.
Insert Cabinet Top
24
Installation
i
19
nstAllAtion witH
9
/
16
Surround Panel
Air Deflector
Figure 21: Removing Air Deflector onto Cabinet Top.
1
" (484
) H
/
mm
igH
16
" (497mm) and it can be reduced to 19
Surround Panel:
1. Fasten the Surround Spacer to the inner top
surface of the Surround Panel using the four (4)
T-20 screws (refer to Figure 19).
2. Refer to i
nstaLLation
to finish assembling the surround panel.
Figure 20: Removing Cabinet Top from Unit.
l
- i
intel
nsert
1
/
" (484mm) by
16
o
t
s
f
he
urround
P
- i
aneL
nsert
Advertisement
Table of Contents
