Electrolux SB315N User Manual page 50

50 www.electrolux.com
It is possible to change predefined sound
of buttons by pressing together Mode
Display
A) Fridge compartment indicator
B) Fridge temperature indicator and timer
indicator
C) Fridge OFF indicator
D) COOLMATIC function
E) Holiday function
F) FROSTMATIC function
3.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set
default temperature.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature refer
to "Temperature regulation".
If "dEMo" appears on the display, refer to
"What to do if..." chapter.
3.3 Switching off
1. Press ON/OFF for a few seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
3.4 Switching on the fridge
To switch on the fridge it is enough to
press the fridge temperature regulator. To
switch on the fridge in the other way:
1. Press Mode until the corresponding
icon appears.
The Fridge OFF indicator flashes.
2. Press OK to confirm.
A B C D E
Off COOL
MATIC
min
L K
button and Temperature colder button for
some seconds. Change is reversible.
F G
FROST
MATIC
J I H
G) Freezer temperature indicator
H) Freezer compartment indicator
I) Alarm indicator
J) ChildLock function
K) MinuteMinder function
L) DYNAMICAIR function
The fridge OFF indicator goes off.
To select a different set
temperature refer to
"Temperature regulation".
3.5 Switching off the fridge
1. Press Mode until the corresponding
icon appears.
The fridge OFF indicator and the fridge
compartment indicator flash.
The fridge temperature indicator shows
dashes.
2. Press OK to confirm.
The fridge OFF indicator is shown.
3.6 Temperature regulation
Set temperature of the fridge and of the
freezer by pressing the temperature
buttons.
Default temperatures:
• +5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set
temperature.
After a power failure the set
temperature remains stored.
The set temperature will be
reached within 24 hours.