Cisco Firepower 2130 Installation & Maintenance page 10

Connect the DC Power Supply Module
Figure 4: Firepower 2100 DC Power Supply Module
1 Handle
3 DC power connector
Safety Warnings
Take note of the following warnings:
Warning Statement 1003 DC Power Disconnection
To reduce risk of electric shock or personal injury, disconnect DC power before removing or replacing
components or performing upgrades.
Warning
Statement 1005—Circuit Breaker
This product relies on the building's installation for short-circuit (overcurrent) protection. To reduce risk
of electric shock or fire, ensure that the protective device is rated not greater than:
AC: 20A
DC: 40A
Installation, Maintenance, and Upgrade
10
Installation, Maintenance, and Upgrade
2 FAIL and OK LEDs
4 Ejector latch