Programming Frequencies - SubSurface Instruments PL-VF10 User Manual

C
hanging
The PL-VF operating modes, frequencies and other functions are user programmable and can be changed at anytime
through a quick selection process in the programming menu.
r
eCeiver
To select the programming options for
• With the unit on, press and hold the p
at the top of the LCD.
• To scroll through the main menu headings, press the f
To enter a selection's sub-menu press the u
•
To browse a selection's menu, press the f
•
• Once the desired option is selected, exiting the sub-menu will save the selection.
To exit a selection's sub-menu use the d
•
Exit the programming menu from the main menu by pressing the p
•
the normal operation mode.
t
ransmitter
To select the desired frequency set for
Press and hold depressed the p
•
• Pressing the f
the Frequency Indicator section of the LCD.
• Release the p
Press the f
•
requenCy
To select and store the desired frequency press and hold the f
•
selected frequency will be displayed on the LCD.
• Continue to toggle through and select the desired frequencies,
Press the p
•
ower
operation.
www.ssilocators.com
p f , m
reset unCtions
Software verSIonS
Software verSIonS
o
ower
B will toggle through available configurations. Repeat pressing until 'U5' is displayed in
requenCy utton
o Button. 'PRO' will be displayed on the LCD.
ower n
B
to toggle through the available frequencies.
utton
o
Button to shut the unit off. This will save the selected frequencies for availability during normal
n
& f
odes reQuenCies
5.7
and Greater
o button for 2 seconds. Once released "PRO"' will be displayed
ower n
requenCy
a (G u )
p rrow aIn p
.
requenCy
a (G d
own rrow aIn own
3.43
and Greater
Button.
n
:
K .
ey
.
Key
) button.
o
button.
ower n
:
B
for 2 seconds. The count of the
requenCy utton
This returns the receiver to
07
SERIES