SubSurface Instruments PL-VF10 User Manual page 34

C
hanging
The PL-VF operating modes, frequencies and other functions are user programmable and can be changed at anytime
through a quick selection process in the programming menu.
Remove the back cover
Un-lock A & B Connectors
A
B
t
ransmitter
To select the desired battery source setup for
• Press and hold depressed the p
Pressing the f
•
in the LCD.
Release the p
•
• Press the f
requenCy
• Press the p
ower
normal operation.
www.ssilocators.com
p f , m
reset unCtions
Remove the Li-Ion tray's screws
Connect & Lock Connectors A & B
Screw the back cover back in place.
o
ower
B
will toggle through available configurations. Repeat pressing until 'batt' is displayed
requenCy utton
o
Button. 'd-Cell' or 'li-ion' will be displayed on the LCD.
ower n
B to toggle through the available battery options.
utton
o Button to shut the unit off. This will save the selected option for availability during
n
& f
odes reQuenCies
A
B
3.43
Software verSIonS
Button.
n
Lift the Li-Ion tray
Screw down the d-Cell tray
:
and Greater
34
SERIES