3 SAFETY INFORMATION
Transport and storage
•
Observe carefully the transport and storage conditions described on the product packaging or other relevant product documents
(e.g. data sheet).
Unpacking and installation
•
Before unpacking and installing the product, this user manual and all relevant installation instructions must be read and understood
carefully.
•
The product might show sharp edges or corners and requires a particular attention during the unpacking and installation.
Unpack the product carefully and do not touch any sharp edges or corners, or any sensitive components on the product.
If necessary, wear safety gloves.
•
In case the product is equipped with a cable, do not twist or pull the cable.
•
The product is an electronic product whose installation requires specific skills and expertise.
The installation of the product should be done by a trained and qualified personnel only.
Handling
•
Depending on your product configuration, the product might be equipped with one or more light-emitting diodes (LED).
Avoid direct eye contact with the blinking or steady light of the light-emitting diodes.
•
The product has been designed for a use under specific conditions, e.g. in a specific temperature range (refer to the product data
sheet).
Any use of the product under different conditions might damage the product or alter its reading performance.
•
The use of other RFID readers or reader modules in direct vicinity to the product, or in combination with the product might damage
the product or alter its reading performance. In case of doubts, contact ELATEC for more information.
•
The user is liable for the use of spare parts or accessories other than the ones sold or recommended by ELATEC.
ELATEC excludes any liability for damages or injuries resulting from the use of spare parts or accessories other than the ones sold
or recommended by ELATEC.
•
In case the product is equipped with a cable, the cable may not be replaced or extended.
ELATEC excludes any liability for damages or injuries resulting from the use of the product with a cable extension or a replaced
cable.
•
Like most electronic devices, RFID systems generate electromagnetic waves that can vary in amplitude and frequency. It is
generally known and accepted that some RFID devices might potentially interfere with personal medical devices, like pacemakers
or hearing aids.
TWN4 MultiTech 3 LEGIC M fulfills general radio and EMC requirements. However, users with a pacemaker or any other
medical device should use TWN4 MultiTech 3 LEGIC M carefully and refer to the information given by the manufacturer
of their medical devices before using TWN4 MultiTech 3 LEGIC M or any host device containing TWN4 MultiTech 3
LEGIC M.
Maintenance and cleaning
•
Any repair or maintenance work should be done by a trained and qualified personnel only.
Do not try to repair or carry out any maintenance work on the product by yourself.
Do not allow any repair or maintenance work on the product by an unqualified or unauthorized third party.
© 2023 ELATEC GmbH – TWN4 MultiTech 3 LEGIC M user manual – DocRev01 – EN – 07/2023
Page 5 of 13
Need help?
Do you have a question about the TWN4 MULTITECH 3 LEGIC M and is the answer not in the manual?
Questions and answers