Sage SCG820 User Manual page 7

OPERATING YOUR NEW APPLIANCE
STEP 2:
Selecting your SHOTS / CUPS
Select the desired amount of ground coffee
required by pressing the SHOTS / CUPS button.
Rotate the Grind Amount Dial to adjust the grinding
time to achieve the correct amount of coffee.
STEP 3:
Select your grind size
For espresso, we recommend selecting Grind Size
setting 12 as a starting point and moving the Grind
Size dial Coarser or Finer to adjust the flow of
espresso as required.
NOTE
If the Grind Size Dial is tight, run the grinder
by pressing the START / PAUSE / CANCEL
button while turning the Grind Size Dial. This
will release coffee grounds caught between
the burrs.
GRINDING INTO GRINDS
CONTAINER OR COFFEE FILTER
STEP 1:
Remove cradle by sliding out from under the
grind outlet.
Slide in grinds container with cap open or coffee
filter directly under grind outlet.
PULL
EN
7