Table of Contents
Advertisement
Menu Settings
Light Source
Information
Standby Settings
Operation
Settings
Page Up/Down
• Menu Type
Sets the OSD menu type according to your needs.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Menu Position
Sets the On-Screen Display (OSD) menu position.
• Reminder Message
Sets the reminder messages on or off.
This menu page displays the following information:
• Light Source Usage Time
• Light hours used under Normal Mode, ECO Mode, SmartEco Mode,
Custom Mode.
• Standby Mode
• Eco: The projector maintains at normal standby mode with less than
0.5W power consumption.
• Normal: Allows the projector to provide network, monitor out and
audio pass through functions in standby mode.
• Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
how to make the connection.
• LED Indicator
You can turn off the LED warning lights. This is to avoid any light
disturbance when viewing images in a dark room.
• Power On/Off Settings
• Direct Power On: Allows the projector to turn on automatically once
the power is fed through the power cord.
• Signal Power On: Sets whether to turn the projector directly on
without pressing
standby mode and detects a HDMI or DisplayPort signal.
• Auto Power Off: Allows the projector to turn off automatically if no
input signal is detected after a set period of time to prevent
unnecessary waste of light source life.
When this function is enabled, the PAGE /PAGE
control can be used to perform page up/down commands.
Once enabled, the USB power delivery function will not be available.
POWER or
ON when the projector is in
Connection on page 20
buttons on the remote
Menu operation
/
to
for
43
Advertisement
Table of Contents
