BenQ LW650 User Manual page 41

Image Resizing
Image Memory
• Digital Zoom
Magnifies or reduces the projected image size.
1. After the adjustment bar displays, press
ZOOM+/ZOOM- on the remote control repeatedly to reduce or magnify
the image to a desired size.
2. Press OK to enter panning mode.
3. Press the directional arrows ( ,
control to navigate the picture.
The picture can only be navigated after it is magnified. You can further magnify the picture
while searching for details.
• Digital Shrink & Shift
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press
magnify the picture to a desired size.
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows ( ,
, , ) to shift the image.
The picture can only be shifted after it shrank.
• Blanking
Blanks some parts of the projected image.
1. Select the Modes of Adjustment first by pressing
2. Press / to highlight the area you want to adjust and press
adjust its range.
Enacting the Reset All Blanking Settings function will return all items in the Blanking menu
to the factory preset values. Pressing OK clears the values of selected item.
• Save Image Memory: Allows you to save and apply several sets of image
settings for regularly used circumstances, including the following
settings: Projector Position, Aspect Ratio, Picture Mode, Source,
Resolution, Light Source Mode, Digital Shrink & Shift, Blanking. You can
choose one set of memory to save the current settings.
• Apply Image Memory: After the image memories are saved, you can
decide if you would like to apply it by choosing a set of memory that you
have saved.
• Rename: Renames the image memories.
/ on the projector or
, , ) on the projector or remote
/ repeatedly to shrink or
/ .
/ to
Menu operation 41