•
Front seat massage* settings (p. 186)
Adjusting front seat side bolster settings*
•
(p. 188)
•
Adjusting front seat lumbar support* (p. 189)
Adjusting the passenger seat from the driv-
•
er's seat* (p. 190)
Adjusting the door mirrors (p. 171)
•
Head-up display settings* (p. 142)
•
Using stored positions for seats,
mirrors and head-up display*
If the positions for the power* seat, door mirrors
and head-up display* have been stored, they can
be easily activated using the memory buttons.
Using a stored position
A stored position can be used with the front door
open or closed:
Front door open
Briefly press one of the memory buttons 1
–
(
) or 2 (
). The power seats, door mirrors
and head-up display will move and stop at
the positions stored in that button.
SEATS AND STEERING WHEEL
Front door closed
Press and hold one of the memory buttons 1
–
(
) or 2 (
) until the seat, door mirrors
and head-up display stop in the positions
stored in that memory button.
If the memory button is released, the seat, door
mirrors and head-up display will stop moving.
WARNING
This list point needs to be translated
•
exactly to: "Because the driver's seat can
be adjusted with the ignition off, children
should never be left unattended in the
vehicle.
Movement of the seat can be STOPPED
•
at any time by pressing any button on the
power seat control panel.
Do not adjust the seat while driving.
•
The seat should be adjusted so that the
•
brake pedal can be depressed fully. In
addition, position the seat as far rearward
as comfort and control allow.
The seat rails on the floor must not be
•
obstructed in any way when the seat is in
motion.
Related information
Manual front seats (p. 182)
•
Power* front seats (p. 183)
•
}}
185
* Option/accessory.