Volvo S90 2019 Owner's Manual page 624

Hide thumbs Also See for S90 2019:
Table of Contents

Advertisement

MAINTENANCE AND SERVICE
Windshield wipers in the service
position
The windshield wiper blades must be in the serv-
ice (vertical) position for certain operations, e.g.
replacing the blades.
Windshield wipers in the service position.
The windshield wipers must be in the service
position when replacing, washing or lifting the
blades (e.g. to scrape ice or snow from the wind-
shield).
CAUTION
Before placing the wipers in service position,
ensure that they have not frozen to the wind-
shield.
622
Activating/deactivating service position
The service position can be activated/deactivated
when the vehicle is stationary and the windshield
wipers are switched off. Service position is acti-
vated/deactivated via Function view in the center
display:
Wiper Service
Tap the
Position
button. The indicator
light in the button will illuminate
when service position is acti-
vated. The windshield wipers
will move to the vertical posi-
tion when service position is
activated. To deactivate the service position, tap
Wiper Service Position
once. The indicator light
in the button will go out when service position is
deactivated.
The wiper blades will also move out of service
position if:
The windshield wipers are turned on.
The windshield washers are turned on.
The rain sensor is activated.
The vehicle begins moving.
CAUTION
If the wiper arms in service position are raised
from the windshield, they must be folded back
against the windscreen before activating wip-
ing, washing or rain sensor as well as before
departure. This is to prevent scratching the
paint on the hood.
Related information
Using the rain sensor (p. 178)
Using the windshield and headlight washers
(p. 180)
Using the rain sensor's memory function
(p. 179)
Filling washer fluid (p. 623)
Replacing windshield wiper blades (p. 621)
Using the windshield wipers (p. 178)
Wiper blades and washer fluid (p. 177)

Advertisement

Table of Contents
loading

Table of Contents