MAINTENANCE AND SERVICE
||
NOTE
To bear in mind when refitting the covering:
The pin in the clip must be pressed back
•
completely before the clip is reinstalled in
the covering.
When the covering is reinstalled, the pin
•
must be pressed in until the end surface
is level with the surface of the clip.
Related information
Replacing bulbs (p. 580)
•
Replacing the low beam headlight bulbs
•
(p. 583)
Replacing the high beam headlight bulbs
•
(p. 584)
Replacing daytime running lights/front park-
•
ing light bulbs (p. 584)
Replacing front turn signal bulbs (p. 585)
•
Bulb specifications (p. 589)
•
16
LED (Light Emmitting Diode)
Contact a workshop for replacement ‒ an authorized Volvo workshop is recommended.
17
582
Location of exterior lights
The vehicle's exterior lighting consists of several
16
different bulbs. LED
bulbs must be replaced
by a workshop. An authorized Volvo workshop is
recommended.
Front bulbs (vehicles with halogen
headlights)
Low beams
High beams
Daytime running light/parking light
Turn signal
Front fog light/cornering illumination* (LED)
Rear bulbs
Fog light
Parking light (LED)
17
Turn signal
Parking light (LED)
Brake light (LED)
Parking light (LED)
17
Backup light
Brake light ‒ central, high-mounted (LED)
* Option/accessory.