Volvo S90 2019 Owner's Manual page 266

KEY, LOCKS AND ALARM
|| Do not keep your foot under the vehicle in a kick-
ing motion. This may prevent activation.
Interrupting foot movement operation
Make one slow forward kicking motion while
–
the trunk lid is opening/closing to stop its
movement.
> The trunk lid will stop closing and return
to its fully open position. The trunk lid can
then be opened or closed manually.
The remote key does not need to be within range
of the vehicle to interrupt closing.
NOTE
There is a risk of reduced or lost function if
there are large amounts of snow, ice, dirt, etc.
on the rear bumper. Make sure to keep the
bumper clean.
NOTE
Please note that the system could be inadver-
tently activated in a car wash or similar if the
remote key is within range.
Related information
• Keyless and touch-sensitive surfaces*
(p. 252)
Opening and closing the power trunk lid*
•
(p. 260)
Remote key range (p. 242)
•
264
Private Locking
The trunk lid and rear seat backrests can be
locked using the private locking function, e.g.
when the vehicle is left at a workshop or with a
valet. This function prevents the trunk lid from
being opened and locks the rear seat backrests
in the upright position.
The function button for private
locking is located in the center
display's Function view.
Depending on the current sta-
tus of the lock,
Locking Unlocked
Locking Locked
played.
Related information
Activating and deactivating private locking
•
(p. 264)
Activating and deactivating private
locking
Private locking is activated using the function
button in the center display and a PIN code.
NOTE
For the valet lock function to be activated the
car must be in at least ignition mode I.
Entering security code before initial use
The first time the function is used, a security
Private
code must be selected. This code can then be
or Private
used to deactivate private locking if the selected
will be dis-
PIN code has been lost or forgotten. The security
code functions as a PUK (security) code for all
PIN codes used for private locking.
Save the security code in a safe place.
To create a security code:
1. Tap the button for private locking in Function
view.
> A pop-up window will appear.
* Option/accessory.