Toshiba MMK-AP0054MHP1-E1 Service Manual page 83

SMMS High-Wall Type
How to remove the drains cap
Clip the drain cap by needle-nose pliers and pull out.
How to fix the drains cap
1) Insert hexagonal wrench (dia. 4 mm) in a centre head.
2) Firmly insert drains cap.
No gap
CAUTION
Firmly insert the drain hose and drain cap; otherwise, water may leak.
In case of right or left piping
After scribing slits of the front panel with a knife or a marking-off pin, cut them with a pair of nippers or an
equivalent tool.
In case of bottom right or bottom left piping
After scribing slits of the front panel with a knife or a marking-off pin, cut them with a pair of nippers or an
equivalent tool.
4 mm
Do not apply lubricating oil (refrigerant machine oil)
during inserting the drain cap.
Application causes deterioration and drain leakage
Insert a hexagon
from the plug.
wrench (4 mm)
Slit
Slit
83
FILE NO. SVM-16045
Installation Manual
EN
TR