What To Do If - Zanussi ZFU422W User Manual

Table of Contents

Advertisement

Available languages

Available languages

Caution! Never use sharp metal tools to scrape off
frost from the evaporator as you could damage it.
Do not use a mechanical device or any artificial means to
speed up the thawing process other than those

What to do if...

Warning! Before troubleshooting, disconnect the
mains plug from the mains socket.
Problem
The appliance does not operate.
The Pilot light does not flash.
The Pilot light flashes.
The Alarm light flashes.
The compressor operates contin-
ually.
The temperature in the freezer is
too low.
The temperature in the freezer is
too high.
Possible cause
The appliance is switched off.
The mains plug is not connected to the
mains socket correctly.
The appliance has no power. There is
no voltage in the mains socket.
The appliance is not working properly.
The temperature in the freezer is too
high.
The temperature is not set correctly.
The door is not closed correctly.
The door has been opened too fre-
quently.
The product temperature is too high.
The room temperature is too high.
The Fast Freeze function is switched
on.
The temperature regulator is not set
correctly.
The Fast Freeze function is switched
on.
The temperature regulator is not set
correctly.
The door is not closed correctly.
The product temperature is too high.
Many products are stored at the same
time.
recommended by the manufacturer. A temperature rise of
the frozen food packs, during defrosting, may shorten
their safe storage life.
Only a qualified electrician or competent person must do
the troubleshooting that is not in this manual.
Switch on the appliance.
Connect the mains plug to the mains
socket correctly.
Connect a different electrical appliance
to the mains socket.
Contact a qualified electrician.
Contact a qualified electrician.
Refer to "Excessive Temperature Alarm"
Set a higher temperature.
Refer to "Closing the door".
Do not keep the door open longer than
necessary.
Let the product temperature decrease to
room temperature before storage.
Decrease the room temperature.
Refer to "Fast Freeze function".
Set a higher temperature.
Refer to" Fast Freeze function".
Set a lower temperature.
Refer to "Closing the door".
Let the product temperature decrease to
room temperature before storage.
Store less products at the same time.
Solution
17

Advertisement

Table of Contents
loading

Table of Contents