Table of Contents
Advertisement
Applies only to Pedelecs with eShift with manual
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Screen display
Change
G EAR
The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 38: Additional journey information
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Screen display
Change
G E AR
The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 39: Additional journey information
Applies only to Pedelecs with eShift with NuVinci
H|Sync/ enviolo with Optimized H|Sync
The following additional functions are available on
the function display:
Screen display
± N UV IN CI CA DEN C E /
± N UV IN CI GEAR
Table 40: Changing the system settings
Applies only to Pedelecs with eShift with Rohloff
E-14 Speedhub 500/14
The following additional functions are available on
the function display:
S CR E E N D I S P L A Y
Change
G E AR
The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 41: Changing the system settings
MY20B01-41_1.0_06.04.2020
Change
The current gear shift is shown
on the display screen. The new
gear is shown briefly on the
screen each time it is changed.
The standard setting is
± NuVinci cadence.
System settings and data
In order to see the system settings and data, the
rider has to call up the system settings. The rider
can change the values of the system settings, but
not the system data.
Screen display
Function
- CL O CK +
Changing the time
- W HE EL CI RC UM +
Value of the wheel circumference in
mm
- ENG L ISH +
Changes the language
- UN IT KM /M I +
Selects whether the speed and
distance are displayed in kilometres
or miles
- TI ME FO RMA T +
Select whether the time is displayed
in 12-hour clock or 24-hour clock
format
- SHI F T REC O M.
Switches the gear recommendation
O FF +
on and off
Table 42: Changeable system settings
Screen display
Function
PO W ER O N HO U RS
Display of the total journey duration
DISP L. VX. X.X. X
Display software version
DU VX. X . X. X
Drive system software version
D U # X X X X X X X X X
Drive system serial number
SE RVI CE MM /YYY Y
(Alternative) defined inspection
date
SE RV. XX KM /MI
(Alternative) defined inspection
BA T. VX .X. X.X
Software version
1 .B A T V X . X .X . X
Software version
2 .B A T V X . X .X . X
Software version
Table 43: System data, not changeable
Additional system settings
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
Screen display
Change
– Start gear +
This is where you can set the start
gear. The automatic gear switch
function is switched off in Position
– –. This menu option is only
shown when the on-board
computer is positioned in its
mount.
Gear adjustment
You can use this menu option to
make a fine adjustment to the
Shimano DI2. You'll find the
specified setting range in the gear
manufacturer's operating
instructions. Make the fine
adjustment as soon as you hear
any unusual noises from the gear
shift. This menu option is only
shown when the on-board
computer is positioned in its
mount.
Gear vx.x.x.x:
this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 44: Changing the system settings
Overview
34
Advertisement
Table of Contents
