Table of Contents
Advertisement
SmartStart
The SmartStart function lets you
define a period of time during which
your washing machine will start auto-
matically. The machine will start on re-
ceipt of a signal, e.g. from your energy
supplier, that indicates that the electri-
city tariff is particularly economical.
This function is active when the
SmartGrid
setting is switched on.
The timeframe can be defined between
15 minutes and 24 hours. During this
period, the washing machine waits for
the signal from the energy supplier. If no
signal is sent during the defined period,
the washing machine starts the wash
programme.
4. Select programme settings
Setting the timeframe
If you have activated the
function in Settings,
stead of
Start in
play when you touch the sensor
(see "Settings – SmartGrid").
The procedure for setting this is the
same as for setting the time for Delay
start.
Use the sensors to enter the
hour and confirm your entry with the
OK sensor.
The hour will be saved and the minute
number block will be highlighted.
Use the sensors to enter the
minutes and confirm your entry with
the OK sensor.
Press the Start/Stop sensor to start
the wash programme with
SmartStart.
The following will appear in the display:
SmartStart
SmartGrid
SmartStart in
will appear in the dis-
in-
OK
31
Advertisement
Table of Contents
