Troubleshooting - Husqvarna 320iB Mark II Operator's Manual

To do a check of the air intake
1. Make sure that the air intake is not blocked on any
side on the product.
2. Stop the product and remove leaves or unwanted
material if necessary.
CAUTION: A blocked air intake
decreases the blowing capacity of the
product and increases the motor's
Keypad
Keypad
Green LED flashing
Red error LED flashing
The product does not start
Red error LED is lit
Battery
LED display
Green LED flashing
788 - 002 - 25.02.2020
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
2. Examine the battery charger for damages, for
3. Make sure that the connection cord of the battery
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
3. Make sure that the terminals on the battery and the

Troubleshooting

Possible faults
Low battery voltage.
The power trigger and the start but-
ton are pressed at the same time.
Temperature deviation.
Dirt in battery connectors.
The product needs servicing.
Possible faults
Low battery voltage.
working temperature. This can result in
motor failure due to overheating.
cracks.
example cracks.
charger is not damaged and that there are no cracks
in it.
cloth. Keep the battery guide tracks clean.
battery charger are clean before the battery is put in
the battery charger or the product.
Possible action
Charge the battery.
Release the power trigger and the
product becomes active.
Let the product cool down.
Clean with compressed air or a soft
brush.
Contact your servicing agent.
Possible action
Charge the battery.
13