Advertisement
4.4 Setup Settings Menu
Overview
The Setup Settings Menu can be accessed while in any mode. From the main screen, press
the MENU button twice. The menu will move right and switch tabs from
icon to the
Setup Settings menu.
NOTE: The settings menu cannot be accessed while the camcorder is recording a video file.
If the camcorder is recording a file, you must stop recording before the settings menu can be
accessed. To stop recording at any time, press the OK button.
4.4.1 LED Flash
This setting controls the LED photo light for your dashcam.
1. In any mode, press the MENU button twice. Select
DOWN buttons. Press the OK button to enter the
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, On and Auto.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button once and your camcorder will return to the
main status screen of the current mode.
4.4.2 Screen Auto Shut Off
This settings allows you to set the length of time before the LCD Screen turns off
automatically.
1. In any mode, press the MENU button twice. Select
UP or DOWN buttons. Press the OK button to enter the
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 1 Minute, 3 Minutes and 5 Minutes.
3. Press the OK button to confirm your selected setting.
4. After the selected amount of time the screen will power off. To wake the screen back
on, press any button.
To exit the settings menu, press the MENU button once and your camcorder will return to the
main status screen of the current mode.
by using the UP or
submenu.
by using the
18
Advertisement
