Advertisement
selected duration recording time is reached, the camcorder will end the recording and begin
recording a new video file seamlessly.
1. In VIDEO mode, press the MENU button. Select
DOWN buttons. Press the OK button to enter the
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 1 Minute Loop, 3 Minutes Loop and 5 Minutes Loop.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.1.3 High Dynamic Range
This setting allows you to turn High Dynamic Range on and off. HDR improves the range of
color and contrast in a digital image and video.
1. In VIDEO mode, press the MENU button. Select High Dynamic Range by using the UP
or DOWN buttons. Press the OK button to enter the High Dynamic Range submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.1.4 Motion Detection
This setting automatically begins recording if movement is detected in front of the camcorder
lens. Once recording, the camcorder will stop recording if not further movement is detected
within a 10-second period of the last movement registered. You may also manually stop
recording anytime by pressing the OK button during a recording.
1. In VIDEO mode, press the MENU button. Select
DOWN buttons. Press the OK button to enter the
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
Note: When selecting OFF, your camcorder will still automatically record upon startup
if you power it off.
by using the UP or
submenu.
by using the UP or
submenu.
10
Advertisement
