Advertisement
4.1.8 Parking Guard (Park Mode)
This setting allows the camcorder to automatically power on and record a video clip if the
camcorder detects a collision while parked and is powered off. You can set the sensitivity
level setting in this menu. This setting will only activate if there is sufficient battery power
a collision occurred, it will automatically begin recording and the recording will be stored with
the
icon. The video file will be locked and protected from deletion.
1. In VIDEO mode, press the MENU button. Select Parking Guard by using the UP or
DOWN buttons. Press the OK button to enter the Parking Guard submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
Note: When selecting Off, your camcorder will still automatically record upon startup if you
power it off.
4.1.9 Headlight Monitor
This setting will alert you to turn on your
1. In VIDEO mode, press the MENU button. Select Headlight Monitor by using the UP or
DOWN buttons. Press the OK button to enter the
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
-in battery. When triggered or when the camcorder thinks
headlights if the road appears too dark.
Monitor submenu.
12
Advertisement
