Table of Contents
Advertisement
2.
To replace the IR board cable, open each ZIF connector (1), insert the IR board cable into each connector
(2), and then close each connector (3) to secure the cable in place.
USB Type-C bracket
To remove the USB Type-C bracket, use this procedure and illustration.
Table 5-13
USB Type-C bracket description and part number
Description
USB Type-C bracket
USB Type-C bracket foil
Before removing the USB Type-C bracket, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the display assembly (see
5.
Remove the heat sink (see
6.
Remove the fans (see
7.
Remove the IR board (see
8.
Remove the system board (see
Remove the USB Type-C bracket:
1.
Remove the Phillips M2.0 × 3.5 screw (1) that secures the bracket to the system board.
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
34).
Display assembly on page
Heat sink on page
43).
Fan on page
42).
IR board cable on page
System board on page
33).
53).
50).
48).
Spare part number
Not available as a spare
part
N13566-001
33).
Advertisement
Table of Contents
