Table of Contents
Advertisement
Peel the camera module cable from the display back cover (4), and then remove the camera module
cable (5). The camera module is available as spare part number N13571-001.
4.
If you need to replace the camera module, thoroughly clean all gasket adhesive residue from the display
panel assembly before installing a new gasket. Remove the protective backing from the new gasket,
align the holes (1) on the gasket with the pins (2) on the display panel assembly, and then attach the
gasket to the display panel assembly.
5.
If you need to remove the display/camera cable, use a utility tool to peel the cable off the inside of
the display back cover (1), and then pull back the tape that covers the display panel connector (2).
56
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
