Table of Contents
Advertisement
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-6
Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the speakers:
1.
Disconnect the speaker cables on each side of the computer (1).
2.
Remove the 2 Phillips M2.0 × 2.0 screw (2) that secures the speakers to the computer.
Preparation for disassembly on page
Bottom cover on page
Battery on page
34).
33).
Spare part number
N13560-001
33).
Speakers
41
Advertisement
Table of Contents
