Craftsman 247.887200 Operator's Manual page 9

aDjUsTMenTs
Chute assembly
The pitch of the chute assembly controls the angle at which the snow
is thrown.
1. Loosen the wing knob found on the left side of the chute assem-
bly and pivot the upper chute upward or downward to the desired
pitch. Retighten the wing knob before operating the snow thrower.
See Figure 6.
2. Position the chute assembly opening by using the chute handle to
throw the snow in the desired direction. See Figure 6.
ASSEMBLY
Figure 6
9