Advertisement
4-point Keystone Correction
Horizontal and vertical keystone correction: When the projected image is not rectangular, it
can be adjusted using 4-point keystone correction.
Use the remote control or projector buttons to enter the settings menu.
Select "Projection" settings and press "OK" to enter.
Turn off "Auto Trapezoid" to enter the manual adjustment mode.
4.
Select "4-Point Trapezoid" and press "OK" to enter, use the direction buttons of the
remote control or the projector to adjust the projected image according to the graphics.
After adjusting the current point, press the "OK" button to go to the next corner point.
5.
After adjusting the 4 points, press the return key to save the current state.
12
Advertisement
