Table of Contents
Advertisement
Option
Description
Redundant
This option is disabled if Redundant OS Location is set to None or if Redundant OS State is set to
OS Boot
Hidden.
When set to Visible, the backup disk is visible to the boot list and operating system. When set to
Hidden, the backup disk is disabled and is not visible to the boot list and the operating system. This
option is set to Visible by default.
BIOS disables the device in hardware, and is not accessible by the operating system.
Access miscellaneous settings
In the BIOS, access Miscellaneous Settings to view details.
1. To view the Miscellaneous Settings screen, power on the system and press F2.
2. Click System Setup Main Menu, System BIOS, and then Miscellaneous Settings.
The following table lists the options available:
Option
System Time
System Date
Time Zone
Daylight Savings Time
Asset Tag
Keyboard NumLock
F1/F2 Prompt on Error
Load Legacy Video Option
ROM
Dell Wyse P25/P45 BIOS
Access
Power Cycle Request
iDRAC settings
The iDRAC settings are an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable
various iDRAC parameters by using the iDRAC settings.
NOTE:
Accessing some of the features on the iDRAC settings needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see the Dell Integrated Dell Remote Access Controller User's Guide at
www.dell.com/idracmanuals.
Description
This option allows you to set the time on the system.
Use this option to set the date on the system.
This option allows you to select required Time Zone.
This option allows you enable or disable Daylight Savings Time. This option is set to
Disabled by default.
Provides the asset tag information and allows you to modify the tag information for
security and tracking purposes.
Use this option to set whether the system boots with the NumLock enabled or disabled.
This option is set to On by default. This option does not apply to 84-key keyboards.
Allows you to enable or disable the F1/F2 prompt on error. The F1/F2 prompt also includes
keyboard errors. This option is set to Enabled by default.
This option determines whether the system BIOS loads the legacy video (INT 10h) option
ROM from the video controller. This option is set to Disabled by default.
This option cannot be set to Enabled, when the Boot mode is UEFI and Secure Boot is
enabled.
Provides the option to enable or disable the Dell Wyse P25/P45 BIOS Access. This option
is set to Enabled by default.
Use this option to enables or disable the Power Cycle Request. This option is set to None
by default.
Pre-operating system management applications
https//
47
Advertisement
Table of Contents
